AXIS I/O Module

overview this guide covers the installation, configuration, and operation of the irisity digital i/o integration the integration supports axis d3110 connectivity hub the axis module contains configurable input ports changes in the digital input state (i e , opening or closing the circuits) can activate or de activate analytics rules in iris+™ a typical use case is using an external alarm system that is activated at the end of a business day, which should then activate the analytics rules in iris+™ the iris+™ digital io gateway service runs on the iris+™ edge device, communicates with the axis module, and responds to signals from the module input ports to affect analytics rules integrations setup in iris+™ the axis module can be added to any iris+™ edge device in your iris+™ account once added, it can be set up to control any rule on any folder or camera in your account in the following example, we use an axis p8221 module with 4 input ports ( a 1, 2, 3, 4) port #1 is set to active select physical view select the relevant edge device select digital io select add device populate the following credentials to the axis module device name host port (default is 80) user password select save the iris+™ edge device disconnects for a few seconds and reconnects the following window appears select edit the input ports mapping section is now editable select the relevant values for each port line as follows field name possible values meaning type folder camera entity as available folder name or camera name as applicable following the type selection rule for type = folder all rules for type = camera all rules for the selected cameras are displayed select either all rules or a specific rule the rule/s which will be activated/deactivated upon port state change on high activate deactivate when a port is active (green) define what action will be applied to the selected rule/s on low undefined (no action taken) activate deactivate when a port is inactive (red) defines what action will be applied to the selected rule/s select save note if a schedule and/or calendar definition exists for any of the selected rules, the defined action overrides the schedule and/or calendar definition older hardware support axis p8221 network i/o audio module contact irisity support customer support technicalsupport\@irisity com mailto\ technicalsupport\@irisity com