---
title: Edge™ Server Installation guide
slug: iris-plus-documentation/edgetm-server-installation-guide
docTags: 
createdAt: 2022-12-01T13:12:22.000Z
---

# Irisity Edge™ software installation procedure

**Lines with $ xxx format show Ubuntu OS commands to be entered.**

1. Open SSH connection to your Irisity Edge™ server
2. Verify server resources:
3. OS version
   **$ lsb\_release -a**

   Ensure the OS version is Ubuntu 22.04, LTS 64-bit, Server Edition with no GUI

:::hint{type="warning"}
Please note that the Edge server is best compatible with Ubuntu 22.04, you may experience instability issues if you choose to use an older version. 
:::

1. CPU Model
   **$ lscpu**

   Ensure the CPU model and number of Cores match the required specification. The line starting
    with CPU(s) shows the number of logical cores available

2. Memory
   **$ free -m**

   Ensure the available memory matches the required specification


3. Browse to the home folder
   **$ cd \~**

4. Download the installation script (copy and past from wget including to the end)
**
**
   **$  wget **[https://storage.googleapis.com/prod-releases-irisplus/doc-release/edge\_ci\_script.sh](https://storage.googleapis.com/prod-releases-irisplus/doc-release/edge_ci_script.sh)****

5. Make the script executable
**
**
   **$ chmod +x edge\_ci\_script.sh**

6. Run the installation script
**
**
   **$ sudo bash ./edge\_ci\_script.sh**

7. The available network interfaces are displayed. Identify your active network interface name (mapped to the IP of the Edge™ Device) and enter its name.

   **NOTE: If your Edge™ machine is configured with multiple network interfaces for redundancy / high
    availability purposes, contact Irisity Customer Support for further instructions (email address enclosed at the bottom of this page)**

8. In case the installation script exits at any point with an error, contact Irisity Customer Support
    with the error output
9. The Script will ask you which solution are you going to deploy, IRIS+™ CM or IRIS+™  Enterprise, please make sure you select the proper solution (if you have any doubts please contact your salesperson to verify)

::Image[]{src="https://api.archbee.com/api/optimize/0qwUIPTrS6-vWLcHFHOFA-RkA8Uo_0WYT97mi3b6xEH-20241009-100014.png" size="80" width="1377" height="488" position="center" showCaption="false"}

13\.   Wait until the message **Done** is displayed


14\.   Check the installation status

$ docker ps -a

One docker container will be running:  Device Manager


15\.   Your Irisity Edge is now ready to be added to your IRIS+™ account

16\.   Please continue from the second point (2.) [here](https://docs.irisity.com/iris-plus-documentation/general-edgetm-device-installation-guide#u6ngB)



# Contact Irisity support

***For enterprise solutions***
E-mail [technicalsupport@irisity.com](mailto\:technicalsupport@irisity.com)
Phone: Not supported

***For central monitoring services***
Email: [support@irisity.com](https://support@irisity.com)
Phone: +46 771 41 11 00